Central heating in Falmouth
We install, upgrade and repair complete central heating systems in Falmouth, including radiators, pipework, controls and power flushing.
- TR11 · TR10 and surrounding villages
- Fixed price agreed before we start
Why central heating in Falmouth is its own job
Falmouth runs down a series of steep hills to one of the deepest natural harbours in the world, and the town has two quite separate plumbing economies going on at once. There is the resident and marine trade around the docks and Penryn, and there is the enormous student and holiday rental market that the university has built up over the past twenty years.
The property here
Victorian and Edwardian terraces make up much of the town, a very large share of them now converted to shared houses and flats. Many are three and four storeys, built into the hillside, with the bathroom at the top and the boiler somewhere improbable. Out towards Mylor, Flushing and Maenporth you get detached and coastal property with a different set of problems again.
What catches people out in Falmouth
Two things define Falmouth work. First, the shared houses: a combi sized for a family simply cannot supply six students who all want a shower between eight and nine, and we spend a lot of time correcting undersized systems and issuing landlord gas safety certificates to deadline. Second, the salt. Properties facing the water lose flue terminals, external condensate runs and exposed copper years earlier than an inland equivalent, and it is worth siting new work with that in mind rather than discovering it in five years.
Central heating in Falmouth — what actually matters
Heating shared houses
Shared houses need controls that work for people who did not choose them and will not read a manual, plus radiators sized for rooms that are occupied at all hours. Simple, robust and properly balanced beats clever every time here.
Wind exposure and heat loss
Wind-driven heat loss on an exposed plot is real and it is not in most standard calculations. A house on an open coastal site genuinely needs more output than the same house sheltered inland, and sizing it as if it were is why so many are cold.
Running pipework in old terraces
Suspended timber floors, solid walls and original features mean pipe routes have to be found rather than assumed. Done thoughtfully you barely see the work; done carelessly it is visible for the life of the house.
Damp, cold and older buildings
In older harbourside property, heating and damp are the same conversation. Warm, well-ventilated buildings dry out; intermittently heated ones do not, and turning the heating off to save money frequently costs more in what the damp then does.
What we cover
- Full central heating installation
- Radiator replacement, additions and relocation
- Power flushing and chemical cleaning
- Magnetic filter installation
- Pipework upgrades and microbore replacement
- Smart and zoned heating controls
- Thermostatic radiator valves
- Underfloor heating
- System balancing — the free improvement almost nobody does
Signs you need us
Radiators cold at the bottom
Sludge. Cold at the top is air and you can bleed it yourself; cold at the bottom is magnetite settling out, and it needs flushing before it takes the boiler with it.
Some rooms never get warm
Usually a balancing problem rather than a boiler problem. The radiators nearest the pump take the flow and the far ones starve. Balancing costs labour, not parts.
The system is noisy
Banging, gurgling and kettling are all telling you something — air, sludge or circulation. None of them improve if ignored.
Black water when you bleed a radiator
That is magnetite in suspension, which is the system corroding from the inside. It is abrasive, it wrecks pumps and it blocks heat exchangers.
How it works
- 1
Assess the whole system
Water quality, flow temperatures, radiator sizing and balance — not just the appliance at the end of it.
- 2
Explain what is actually wrong
Often the answer is cheaper than people expect. Balancing and a flush frequently fix what was assumed to be a dying boiler.
- 3
Quote the work
Fixed price, agreed before we start.
- 4
Install, flush, balance, protect
New systems get flushed, dosed with inhibitor and balanced properly. It is the difference between a system that lasts and one that does not.
What it costs
Heating work is quoted after we have seen the system. Power flushing in particular is priced by the number of radiators and the state of the water, so an accurate figure needs a look rather than a guess over the phone.
Mains gas in Falmouth
Falmouth and Penryn have good mains gas coverage; the outlying villages towards Constantine and Mawnan Smith are more variable.
Where we work around Falmouth
TR11, TR10 and the villages around them. These are the places we are in most weeks — if yours is not listed, it does not mean we do not cover it.
Near Pendennis Castle, Falmouth Docks, National Maritime Museum Cornwall? That is well within our normal patch.
Everything else we do in Falmouth
Plumbers in Falmouth
Leaks, taps, toilets, tanks, pipework and everything else that carries water around a house.
Read moreEmergency plumbing in Falmouth
Burst pipes, major leaks, no water and no heat — answered out of hours, every day of the year.
Read moreBoiler repair in Falmouth
Fault-finding and repair on gas, oil and LPG boilers — diagnosis first, parts second.
Read moreBoiler installation in Falmouth
New boilers and full replacements, sized properly to the house rather than to the old one.
Read moreBoiler servicing in Falmouth
Annual servicing and landlord gas safety certificates — the full check, not a five-minute glance.
Read moreBathrooms in Falmouth
Complete bathroom installations, managed start to finish by the people doing the plumbing.
Read moreCentral heating in Falmouth — your questions
If yours is not here, send us the form and ask. We would rather spend five minutes answering a question than have you book something you did not need.
Do I really need a power flush?
If the water runs black and radiators are cold at the bottom, yes. If the system is clean, no — and we will tell you that rather than selling you one. It is a commonly oversold service.
What is balancing and why does it matter?
Setting the flow through each radiator so they all heat evenly rather than the nearest ones hogging everything. It is mostly labour, it is frequently skipped, and it fixes a surprising number of "cold room" complaints.
Are smart controls worth it?
Zoning genuinely saves money in a house where rooms are used at different times. A smart thermostat on a single-zone system is more convenience than saving, and we will be straight with you about which you are buying.
Can you add a radiator to an existing system?
Usually. The question is whether the boiler and pipework have the capacity for it, which we check rather than assume.
Do you cover the villages around Falmouth as well as the town?
Yes — Penryn, Flushing, Mylor Bridge, Budock Water, Swanpool, Maenporth, Constantine and Mabe Burnthouse are all part of our normal Falmouth patch, along with the smaller places between them. If you are not sure whether we reach you, send the form and ask.
How quickly can you get to Falmouth?
A straightforward run down from Truro on the A39. Parking in the town centre is the constraint, not the distance.
We also cover, close to Falmouth
Need central heating in Falmouth?
Send us the details and someone who knows Falmouth will ring you back. We will tell you honestly whether you need us, what it is likely to involve, and what it will cost.